 |
|
|
Cross beam area sensors
|
|
The NA1-11 sensor detects objects in a field of up to 10 x 100cm. This makes it particularly well suited to applications for which the position of the objects to be detected varies. This sensor is based on innovative cross-beam technology in which the infrared beam of each individual emitter element is sent to all receiver elements. This allows even small and narrow objects, such as letters, to be securely detected. At just 10mm wide these light barriers help to save space in installation.
Characteristics:
- 11 emitters and receivers elements in each case (grid spacing 10mm)
- Range of up to 100cm
- Maximum detection field size 10 x 100cm
- Smallest detectable object size: Ø = 13.5mm
- Clearly visible LED indicators (static/flashing)
- light ON/dark ON
- Slim line design (10mm)
Accessories:
|
|
|
| NPN output |
NA1-11 |
| PNP output |
NA1-11-PN |
| Sensor type |
Area Sensor |
| Sensing height |
100mm |
| Sensing width |
17 - 100cm |
| Grid spacing |
10mm |
| Standard detectable object |
Ø ³13.5mm |
| Detectable target |
Opaque material |
| Response time |
Max. 5ms (dark ON)
Max. 10ms (light ON) |
| Output transistor |
Max. 100mA |
| Emitting diode |
Infrared LED |
| Rated current consumption without load |
Emitter: max. 80mA
Receiver: max. 100mA |
| Housing material |
Plastic |
| Protection |
IP62 |
| Physical size (HxWxL) |
140 x 10 x 30mm |
| Connection method |
Cable 2m |
| Operating voltage |
12 - 24V DC (± 10%) |
| Usable ambient temperature |
0°C to +55°C |
| Weight (approx.) |
Emitter: 80g
Receiver: 85g |
|
|
|
|
|
NA1-11 typical applications
|
Object detection
|
Component control
|
Detecting workpieces on conveyor line
|
|
|
Onderneming
Ionisers
