 |
|
|
Laser class 1, visible red light version
|
|
LM10 series is the newest generation of Laser Sensors and offers an excellent performance. The new single channel technology and the automatic gain adjustment allow high resolution measurements at a wide dynamic range. The LM10 series is especially suitable for accurate thickness-, displacement-, and position measurements.
Characteristics:
- Conform to IEC Class 1
- Resolution up to 5µm
- Smallest spot of d< 90µm
- X-talk prevention function
|
|
|
| |
ANR1150 |
ANR1151 |
ANR1182 |
ANR1115 |
| Laser class |
1 |
| Measurement range (mm) |
50 ± 10 |
50 ± 10 |
80 ± 20 |
130 ± 50 |
| Beam dimensions (mm) |
0.6 x 1.1 |
0.09 x 0.05 |
0.7 x 1.2 |
0.7 x 1.4 |
| Repense frequency |
10/100/1000Hz |
| Resolution (µm) |
5/16/50 |
5/16/50 |
20/65/200 |
100/330/1000 |
| Laser wavelength |
685nm |
| Pulse duration |
15µs |
| Pulse pause |
15µs |
Max. output
of laser diode |
0.4mW |
| Housing material |
Zinc die cast |
| Degree of protection |
IP67 |
| Size |
60 x 60 x 20mm |
| Connection method |
Connector |
| Usable ambient temp. |
0°C to +50°C |
| Weight (approx.) |
300g |
|
|
|
|
Laser class 2, visible red light version
|
|
The LM10 series includes also a wide range of class 2 laser sensor heads which offer an even smaller resolution. Also a long distance type with a measuring range from 100mm to 400mm is available. The cable length of all class 2 types is expandable up to 30m. Characteristics: - Long distance type: 250 ± 150mm
- Resolution up to 1µm
- Smallest spot of d< 90µm
- X-talk prevention function
- Connection with single- or double-channel comparator
Accessories: - Expansion cables up to 30m
|
|
|
| |
ANR1250 |
ANR1251 |
ANR1282 |
ANR1215 |
ANR1226 |
| Laser class |
2 |
| Measurement range (mm) |
50 ± 10 |
50 ± 10 |
80 ± 20 |
130 ± 50 |
250 ± 150 |
| Beam dimensions (mm) |
0.6 x 1.1 |
0.09 x 0.05 |
0.7 x 1.2 |
0.7 x 1.4 |
0.8 x 1.5 |
| Response frequency |
10/100/1000Hz |
| Resolution (µm) |
1/3,5/10 |
1/3,5/10 |
4/13/40 |
20/65/200 |
150/500/1500 |
| Laser wavelength |
685nm |
| Pulse duration |
15µs |
| Pulse pause |
15µs |
| Max. output of laser diode |
1.6mW |
| Housing material |
Zinc die cast |
| Degree of protection |
IP67 |
| Size |
60 x 60 x 20mm |
| Connection method |
Connector |
| Usable ambient temp. |
0°C to +50°C |
| Weight (approx.) |
300g |
|
|
|
|
LM10 controller
|
|
Since the LM10 Sensor heads and the LM10 Controllers can be connected and changed freely, the ideal combination for your application will be found easily. In addition to the analogue output the LM10 controllers have one (single comparator type) or two (double comparator type) set-point judgement outputs. The double comparator type shows the analogue values on a LCD.
Characteristics:
- Zero Point adjustment
- Sensitivity selection
- VGA (Variable Gain Amplifier)
- Adjustment of frequency and set-points
- Range LED
- LCD for analogue values and set-points (double comparator type)
- Alarm output
- Intensity output
- Analogue output either current loop or voltage
- Transistor output either PNP or NPN technology
|
|
|
| NPN output |
ANR5131 |
ANR5141 |
ANR5231 |
ANR5241 |
| PNP output |
ANR5132 |
ANR5142 |
ANR5232 |
ANR5242 |
| Type |
Single comparator |
Double comparator |
| Indication |
LED |
LCD-display |
| Analogue output |
±5V, max.100mA |
4 - 20mA |
±5V,
max.100mA |
4 - 20mA |
| Evaluation output |
Transistor, max. 100mA, 30V DC |
| Intensity output |
±5V |
| Alarm output |
Transistor, max. 100mA, 30V DC |
| Housing material |
Plastic |
| Size |
35 x 96 x 55mm |
| Connection method |
Cable |
| Operating voltage |
12 - 24V DC (-15% / +10%) |
| Usable ambient temp. |
0°C to +50°C |
| Weight (approx.) |
180g |
|
|
|
|
|
LM10 typical applications
|
Workpiece detection
|
Diameter control
|
Thickness measurement
|
|
|
Ionisers
Producten
