 |
|
|
Inductive sensors, cuboid design
|
|
These cuboid inductive proximity sensors have extremely miniaturised dimensions. Each sensor is available in four different versions. These differ due to normally-open and normally-closed contact functions on object approach as well as through differing frequencies in order to eliminate mutual interference.
Characteristics:
- Extremely small design
- Case / cable oil resistant
- Protection class IP67
- PNP/NPN or non contact 2-wire
- Available with different frequencies (to avoid mutural interferences)
- Interflection resistant cable available
Accessories:
|
|
|
| Normally open | GXL15F(P) | GXLN12F(P) | GXL8F / GXL8H* | | Normally closed | GXL15FB(P) | GXLN12FB(P) | GXL8FB / GXL8HB* | | Sensor type | Front sensing | Side sensing / front sensing* | | Rated sensing distance | 5mm | 3mm | 2.5mm | | Sensing range | 0-4mm | 0-2mm | 0-1.8mm | | Detection frequency | 250Hz | 500Hz | | Sensing standard object | Iron sheet | | Hysteresis | 20% or less of sensing distance | | Output transistor | Max. 100mA | | Power consumption | Max. 15mA | | Housing material | Plastic | | Protection | IP67 | | Physical size (H x W x L) mm | 32 x 15 x 8 | 27 x 12 x 7.1 | 20 x 8 x 7,4
8 x 8 x 23* | | Connection method | Cable 1m | | Supply voltage | 12 - 24V DC (± 10%) | | Ambient temperature | -10°C to +55°C | | Weight | 20g | 12g | | (P) = PNP output |
|
|
|
|
|
GXL typical applications
|
Positioning
|
Positioning
|
Positioning
|
|
|
Ionisers
Producten
