 |
|
|
Colour detection sensor amplifier
|
|
FZ10 colour sensors are equipped with three LEDs - red, green and blue - as their light source. This contributes to a long sensor life and a high immunity against disturbances through ambient light. The RGB components of each detected colour are processed digitally, thus smallest differences will be detected by this sensor. Even white and yellow can be distinguished. Just pressing a single button, the sensor memorises the inspected colour as a reference. Allowable deviations from this target colour can be set with a 16 steps tolerance adjuster. Four different fibres with spot diameters from 1 to 8mm and different sensing ranges are available for this colour sensor. With a response time of only 1ms, FZ10 sensor are suitable also for high-speed colour checking applications. Characteristics: - Excellent colour detection
- "Teach in" button for easy sensor adjustment
- 16 steps tolerance adjuster
- Only 1ms response time
- Miniature construction
- High ambient light immunity
- Long life
- Timer function
|
|
|
| NPN output |
FZ-11 |
| PNP output |
FZ-11P |
| Sensor type |
Amplifier for fibre optical colour sensor (RGB) |
| Sensing range |
Depending on the fibre cable used |
| Sensing object |
Translucent or opaque objects bigger than the spot diameter |
| Colour adjustment |
Teach in button |
| Colour tolerance |
Adjustable in 16 grades |
| Response time |
1ms or less |
| Timer function |
Fixed off-delay: 40ms |
| Output transistor |
NPN or PNP, 100mA |
| Short circuit protection |
Equipped |
| Current consumption |
45mA or less |
| Emitting diodes |
Red, green, blue |
| Housing material |
ABS, heat resistant |
| Physical size (HxWxL) |
31.5 x 20 x 60mm |
| Connection method |
Cable 2m |
| Operational temperature |
-10 to +55°C |
| Weight (approx.) |
85g |
|
|
|
|
FZ10 colour detection sensor fibre optics
|
Characteristics:
- Miniature construction
- Different sensing ranges
- Different spot sizes
- Extremely small spot type
- Long sensing range type
- High precision type
|
|
|
| |
FD-L51 |
FD-L52 |
FD-L53 |
FD-L54 |
| Type |
Standard |
High precision |
Extremely small spot |
Long sensing range |
| Rated sensing distance |
20mm |
10mm |
5mm |
40mm |
| Sensing range |
14 - 24mm |
8 - 11mm |
4 - 6mm |
30 - 50mm |
| Spot diameter |
ø 5mm |
ø 2.5mm |
ø 1mm |
ø 6mm |
| Allowable bending radius |
R25mm or more |
| Fibre cable length |
1m |
| Material |
Plastic |
| Head dimensions (HxWxL) |
21 x 8 x 31mm |
24 x 8 x 33mm |
30 x 7 x 35mm |
26 x 12 x 34mm |
| Operational temperature |
-20°C to +70°C |
|
|
|
|
|
FZ10 typical applications
|
Mark detection
|
Detection of plated surface
|
Label checking
|
|
|
Ionisers
Producten
