 |
|
|
DPH - high-speed pressure sensor
|
|
A response time of 1ms makes this the fastest sensor in the industry. In addition to the high speed response time, the detachable head represents a major breakthough for easy operation and maintenance. This sensor is able to use in application where long pressure lines should be avoid, and a fast and precise measurement must be possible even with unsteady pressure. The DPH is available with three different pressure ports and a plug-in connector.
Characteristics:
- Miniaturized design
- Response time min. 1ms
- Compound pressure type available (-100,0 to 100,0 kPa)
- LED indicator for output operation
- Three different pressure ports available
- Easy mounting
|
|
|
| Sensor head |
DPHA00/ A10/ A20/ A30 |
DPHA02/ A12/ A22 |
DPHA07/ A17/ A27 |
| Sensor type |
Vacuum pressure sensor |
Positive pressure sensor |
Compound pressure sensor |
| Rated pressure range |
0 to 101.3kPa |
0 to 1.000MPa |
-100.0 to 100.0kPa |
| Pressure resistance |
500kPa
|
1.500MPa |
500kPa |
| Application fluid |
Non-corrosive gas |
| Analog output |
1 to 5V |
| Rated current consumption |
Max. 17mA |
| Housing material |
Plastic |
| Protection |
IP40 |
| Physical size (HxWxL) |
DPHA00/ A30/ A02/ A07: 12,5 x 20 x 20mm;
DPHA10/ A20/ A12/ A22/
A17/ A27: 12,5 x 20 x 25mm |
| Connection method |
Cable 0.1m, with connector |
| Operating voltage |
12 to 24V DC (+10%, -15%) |
| Usable ambient temp. |
0 to +50°C |
| Temperature characteristics |
Over ambient temperature range +10 to +40°C: within +/- 1% F.S of detected pressure at +25°C
Over ambient temperature range 0 to +50°C: within +/- 3% F.S. of detected pressure at +25°C" |
| Weight (approx.) |
DPHA00/ A30/ A02/ A07: 6g
DPHA10/ A20/ A12/ A22/ A17/ A27: 10g |
|
|
|
|
DP5 - digital controller for DPH pressure sensor
|
|
In response to the needs of the times, amid the continuing quest for faster and more efficient production lines, comes the DP5/DPH series, a digital pressure sensorwith a detachable head. Characteristics: - Miniaturised design
- User friendly two-colour digital design (red/green)
- 4 display cycles selectable
- Selection from 6 pressure units
- Auto reference
- Remote zero-adjustment input
- Two independent outputs plus analog voltage outputs
- Plug-in connector
Options: - Panel and Controller mounting brackets
|
|
|
| NPN output |
DP5C |
| PNP output |
DP5CP |
| Type |
Controller for DPH pressure sensor |
| Rated pressure range |
0 to -101,3kPa |
0 to 1MPa |
-100,0 to 100,0kPa |
| Setting pressure range |
Vacuum pressure: 101,3 to - 101,3kPa
Positive pressure: - 1,050 to 1,050MPa
Ccompound pressure: -199,9 to 199,9kPa |
| Display |
3 1/2 digit LCD display
LCD segments light red when comparative output is ON, and green when it is OFF |
| Resolution |
0.1% F.S. |
| Hysteresis |
1digit |
| Response time |
1ms, 16ms, 128ms, 512ms |
| Analogue voltage output |
1 to 5 VDC |
| Output transistor |
Max. 100mA |
| Output modes |
Hysteresis mode, window comparator mode, leak test mode, forced output mode |
| Rated current consumption |
Max. 60mA |
| Housing material |
Plastic |
| Protection |
IP 40 |
| Physical size (HxWxL) |
20 x 40 x 43mm |
| Connection method |
Connector |
| Operating voltage |
12 - 24V DC (-15% / +10%) |
| Usable ambient temp. |
0 to +50°C |
| Weight (approx.) |
20g |
|
|
|
|
|
DPH / DP5 typical applications
|
Intake pressure control
|
Vacuum pressure monitoring
|
Leak check
|
|
|
Ionisers
Producten
