 |
|
|
High resolution pressure sensor with dual 3-colour display
|
|
Highly accurate and reliable pressure sensor with multifunction (analogue voltage output operation indicator). 'Current value' and 'threshold value' can be checked at the same time to improve ease of operation and visual checking. A clear, 12-segment display makes this easy. With the unique copy function, man-hours and human errors are reduced. Various types of applications can be realised thanks to three output modes and a wide range of modules allowing pressure from -1 to +10 bars to be measured. New: M8 connector type available.
Characteristics:
- High resolution and repeatability
- Low and high pressure types
- Dual 3-colour display (red, green, orange); industry first
- Analogue output
- Current and threshold value in one view
- Copy function; new global standard
- Three operation modes, easy setting
- Equipped with an ECO mode
- Easy installation
- M8 connector type
Accessories:
- Connector
- Connector attached cable 1, 3, 5m
- Sensor mounting bracket
- Panel mounting bracket
- Front protection cover
|
|
|
| PNP |
DP101(A)EP |
DP102(A)EP |
DP101(A)NP |
DP102(A)NP |
| NPN |
DP101(A) |
DP102(A) |
DP101(A) |
DP102(A) |
| Sensor type |
For low pressure |
For high pressure |
For low pressure |
For high pressure |
| Rated pressure range |
-1,000 to 1,000bar |
-1,000 to 10,00bar |
-1,000 to 1,000bar |
-1,000 to 10,00bar |
| Setting pressure range |
-1,000 to 1,000bar |
-1,000 to 10,00bar |
-1,000 to 1,000bar |
-1,000 to 10,00bar |
| Pressure resistance |
5.0bar |
15.0bar |
5.0bar |
15.0bar |
| Applicable fluid |
Non-corrosive gas |
| Hysteresis |
Minimum 1 digit |
| Response time |
2.5 - 5,000ms (selectable by key operation) |
| Transistor output |
Max. 100mA, 30V DC |
| Output modes |
EASY mode / hysteresis mode / window comparator mode |
Analogue output (Multi-
function type only) |
1.0 to 5.0V |
0.6 to 5.0V |
1.0 to 5.0V |
0.6 to 5.0V |
| Rated current consumption |
35 mA or less |
| Housing material |
Plastic |
| Protection |
IP40 |
| Physical size (HxWxL) |
30x30x42.5mm |
| Connection method |
Connector |
| Operating voltage |
12 to 24 V DC ± 10 % |
| Usable ambient temp. |
-10 to +50 °C |
| Connection method |
± 0,5 % F.S. (20°C) |
± 1,0 % F.S. (20°C) |
± 0,5 % F.S. (20°C) |
± 1,0 % F.S. (20°C) |
| Weight |
Net weight: 40 g approx., Gross weight: 135 g approx. |
|
P: PNP output
A: High performance (multi-function)
N: NPT1/8 (with M5 female thread)
E: G1/8 (with M5 female thread)
|
|
|
|
PNP
(M8 connector type) |
DP111EPJ |
DP112EPJ |
DP111AEPJ |
DP112AEPJ |
| Sensor type |
For low pressure |
For high pressure |
For low pressure |
For high pressure |
Rated pressure range
(bar) |
-1,000 to 1,000 |
-1,000 to 10,00 |
-1,000 to 1,000 |
-1,000 to 10,00 |
Setting pressure range
(bar) |
-1,000 to 1,000 |
-1,000 to 10,00 |
-1,000 to 1,000 |
-1,000 to 10,00 |
| Pressure resistance (bar) |
5.0 |
15.0 |
5.0 |
15.0 |
| Applicable fluid |
Noncorrosive gas |
| Hysteresis |
Minimum 1 digit |
| Response time |
2.5 - 5,000ms (selectable by key operation) |
| Transistor output |
Max. 100mA, 30V DC |
| Output modes |
EASY mode / hysteresis mode / window comparator mode |
| Analogue output (multifunction type only) |
-- |
1.0 to 5.0V |
0.6 to 5.0V |
| Rated current consumption |
35mA or less |
| Housing material |
Plastic |
| Protection |
IP40 |
| Physical size (HxWxL) |
30x30x42.5mm |
| Connection method |
M8 connector |
| Operating voltage |
12 to 24V DC ± 10 % |
| Usable ambient temp. |
-10 to +50 °C |
| Connection method |
± 0,5 % F.S. (20°C) |
± 1,0 % F.S. (20°C) |
± 0,5 % F.S. (20°C) |
± 1,0 % F.S. (20°C) |
| Weight |
Net weight: approx. 40g, gross weight: approx. 135g |
|
P: PNP output
A: High performance (multifunction)
N: NPT1/8 (with M5 female thread)
E: G1/8 (with M5 female thread)
|
|
|
|
|
|
DP100 typical applications
|
Intake pressure check
|
Checking reference pressure
|
Leak test
|
|
|
Ionisers
Producten
